Ledj Mood Bar, Руководство пользователя

Страница: 3 / 12

www.prolight.co.uk Mood Bar User Manual
3
Safety advice
Rigging:
The installation of this unit must be carried out by qualified service personal only. Improper installation
can result in serious injuries and/or damage to the property. Overhead rigging requires extensive
experience! Working load limits should be respected, certified installation materials should be used
and the installed unit should be inspected regular intervals for safety.
It is the users responsibility to ensure the unit is stable by the use of fixings or ballasts as required.
The user should risk assess based on the installation position/application.
Before rigging overhead:
• Make sure the area below the installation place is free from unwanted persons during rigging,
de-rigging and servicing.
• Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls.
• The device should be installed out of reach of people and outside areas where persons may walk by or
be seated.
• Before rigging make sure that the installation area can hold a minimum point load of 10 times the
device’s weight.
• Always use a certified safety cable that can hold 12 times the weight of the device when installing the
unit. This secondary safety attachment should be installed in a way that no part of the installation can
drop more than 20cm if the main attachment fails.
• The device should be well fixed; a free-swinging mounting is dangerous and should not be used.
• Don’t cover any ventilation openings as this may result in overheating.
Rigging with supplied floor standing bracket:
• The supplied floor standing bracket can be used to place the unit on the floor and point it in a desired
direction. In this case a proper and stable base should be used along with extra fixings or ballasts.