7
black,
brown, grey
brown
yellow/ green
blue
blue
fig. 5
2. Hold bracket against the wall and mark drill points, drill the holes, insert the dowel.
Use suitable material for wooden walls or lightweight walls.
Fasten the bracket with screws and washers (fig. 4).
3.
Disconnect the power supply for the connecting cable!
Prepare the current-less cable in according to statutory regulations.
4. Fasten the LED floodlight with the screws (fig. 1), washers and tooth washers on the
bracket. Align the LED spotlight (fig. 2) and tighten the screws.
5. Connect the wires according the marks. (fig. 5).
Switch on the power supply.
② LUX: 0-2000 lux twilight sensor sensivity adjustable.
At maximum setting (sun) the motion sensor work also at daylight.
At minimum setting (moon) the motion sensor work only at darkness.
③ TIME: 10 (±5 ) sec. - 5 (±1) min. time adjustable.
At the maximum setting, the spot illuminates 5 minutes after the sensor area was left.
At the minimum setting, the spot illuminates 10 seconds after the sensor area was left.
Detection distance: 8-12 meters
Detection angle: 90°
To change the settings, turn the sensor
cover ① to the right or to the left.
Then adjust the settings (see ② + ③).
After settings the sensor cover must be
brought back to the starting position in
order to ensure optimum weather
protection.
IR motion sensor setting
Caution! Turn adjusting screws carefully until it stops.
No 360° turn possible.
fig. 4
Optimal installation
height: 2.5-3.0 m
fig. 2
fig. 3
①
②
③
