| 13
TUBELED_40 II
5 | Connection
Suitable connection material, cables and accessories can be found in the accessory
range of LED2WORK.
The LED light can be controlled using 3 different operating modes, which can be select-
ed as desired. The wire cross sections of the connecting cables used are the
PIN assignment of the M12 connector is as follows:
Schematic drawing of M12 plug
Possible variants of the M12 connector
Mode 1
PIN 1 = 24V DC
PIN 2 = not used
PIN 3 = GND
PIN 4 = not used
PIN 5 = not used
Mode 2
PIN 1 = not used
PIN 2 = not used
PIN 3 = GND
PIN 4 = 24V DC
PIN 5 = not used
PIN 1
Light
t
t
PIN 4
Light
t
t
The luminaire can only be switched ON and OFF by switching the supply
voltage at PIN 1.
The luminaire can only be switched ON and OFF by switching the supply
voltage at PIN 4.
Voltage at PIN
Voltage at PIN
Action luminaire
Action luminaire
4
3
1
2
5
ghv Vertriebs-GmbH
| Am Schammacher Feld 47 | 85567 Grafing | T 49 80 92 81 89 0 | [email protected] |
www.ghv.de
