Lectrosonics DM812, Справочное руководство

Страница: 15 / 51

Reference Manual
Rio Rancho, NM
15
(Routing input channel 1 to output channel 1.) Chang-
ing either input or output channel changes the matrix
crosspoint.
To change the output channel, press the Item Select
Button below OUT in the Item List. Rotate PUSH FOR
MENU/SELECT until the desired output channel is
displayed.
To change the input channel, press the Item Select
Button below IN in the Item List. Rotate PRESS FOR
MENU/SELECT until the desired input channel is dis-
played. Press PRESS FOR MENU/SELECT to set the
current matrix crosspoint input to the selected channel.
NOTE: Select the desired matrix crosspoint before
making the following adjustments.
MixMode
Defines the mixing mode used to combine the inputs to
the selected matrix crosspoint. Four modes are avail-
able: Auto, Direct, Override and Background. (See Digi-
tal Matrix, Mixing Mode for a description of the various
mixing modes.)
To view or change the mixing mode for the selected
crosspoint, press the Item Select Button below MIX in
the Item List, then rotate PUSH FOR MENU/SELECT
to display the desired mixing mode in the Parameter
Display Area.
Gain
Select GAI to view or change the gain for the selected
crosspoint. After the desired input and output have been
selected, adjust the gain to be applied at this cross-
point. Values range from -70 dB to +20 dB in 1 dB
increments.
PhanPwr
PHA is used to turn phantom power on or off for the
selected input channel. Select PHA by pressing the
associated Item Select Button. Rotate PUSH FOR
MENU/SELECT change the current setting.
Matrix Crosspoint (Xpoint) Setup Screen
The Matrix Setup Screen is used to apply automatic
mixing and level control to the digital matrix crosspoints.
The settings are accomplished in “real time,” i.e., you
will immediately hear the result of any changes. When
finished, use the front panel BACK button to exit the
Input Setup Screen and return to the Setup Menus.
Input
Channel
Parameter
Display Area
Items List Screen Title
Output
Channel
⇓
⇓
To select the Matrix setup screen, navigate to the Setup
menu, highlight Matrix and press the PRESS FOR
MENU/SELECT control.
There are four sections to the Matrix (Xpoint) Setup
Screen: Screen Title, Items List, Parameter Display
Area, and Input and Output Channels. The various
entries in the Items List are accessed via correspond-
ing Item Select Buttons below the LCD. The Input and
Output Channel are the currently selected channels
and the Parameter Display Area displays the name and
current setting of the various parameters that can be
adjusted through this screen.
In/Out Channel Select
The In/Out Channel Select Screen is used to config-
ure individual matrix crosspoints. The selected input
and output channels for the current matrix crosspoint
are displayed at the upper right section of the LCD. In
this example the settings for crosspoint 1,1 are shown.