background image

LECTRICEBIKES.COM | 602.715.0907

56

•  Always remove the battery pack before performing any bicycle 

inspection, maintenance, or repair.

•  If you suspect that something is loose, do not ride your bicycle. 

All nuts, bolts, and screws require the proper tightening force. 

Too little force and the fastener may not hold securely. Too much 

force and the fastener can strip threads, stretch, deform, or break. 

Either way, incorrect tightening force can result in component 

failure, which can cause you to lose control and crash. Take your 

bicycle to a bicycle repair shop for service.

•  Do not paint any components of your Lectric eBike as they may 

cause premature failure of the component.

•  Do not submerge your Lectric eBike or its components in water 

or use a pressure washer to clean.

Caring for Your eBike

Always observe the operating and storage temperatures of your 

Lectric eBike and its components. Protect motor, display, and battery 

pack against extreme temperatures (e.g. from intense sunlight 

without adequate ventilation). Extreme temperatures can damage 

components (especially the battery pack).
Please have your Lectric eBike serviced at least once a year.

Do not tamper with your bicycle. Tampering is defined as removing 

or replacing any original equipment or modifying your bicycle 

in any way that may change its design and/or operation. Such 

changes may seriously impair the handling, stability, and other 
aspects of the bicycle, making it unsafe to ride. Tampering can 
void your warranty and render your bicycle noncompliant with the 
applicable laws and regulations. Lectric eBikes is not responsible 
for any direct, incidental, or consequential damages. This includes, 
without limitation, damages for personal injury, property damage or 
economic losses due to tampering.
To ensure safety, quality, and reliability, use only original parts or 
Lectric eBikes authorized replacements for repair and replacement.

WARNING!

Содержание XP 3.0

































































Отзывы: