LECTRICEBIKES.COM | 602.715.0907
35
To engage Lectric “Passenger Mode”:
1. Press and hold the (-) and buttons on the control pad
simultaneously for 5 seconds until the screen flashes PAS and
speedometer.
2. Check setting has been activated by riding without passenger and
speed has been limited to 10mph.
To disengage:
1. Turn your Lectric XP OFF and then ON. Or change your P08
setting to 32 or 100 and Passenger Mode will deactivate.
Walk Mode
Passenger Mode
Electric bicycles are heavier than bicycles. To make walking the
bicycle easier, your Lectric XP is equipped with Walk Mode, which can
be toggled on or off in the settings menu. Walk Mode may be subject
to local regulations. Check your local regulations to determine if
allowed.
To activate:
Hold down the minus (-) button on the display control pad and the
motor will engage at a speed similar to a slow walk.
NOTE
: When Walk Mode is active, “Walking” will appear on the display.
Passenger Mode is designed to add an additional level of protection
when a passenger is on the bike. Passenger Mode will limit the top
speed of your Lectric XP to 10mph. You and your passenger will need
to continue to practice caution on the Lectric XP.
To deactivate:
Pull either brake lever to disengage Walk Mode OR press and hold the
minus (-) button on the display control pad.
ALWAYS keep wheels in contact with the ground when using
Walk Mode.