LECTRICEBIKES.COM | 602.715.0907
48
To Charge:
1. Plug the cable from the charger into the port on the side of the
battery pack.
2. Plug the charger power cable into an electrical mains wall socket.
Note:
Use only the supplied input connection: standard AC power
cord when connecting to the household electrical supply.
Note:
The charging process is only possible when the temperature
of your Lectric eBike battery is within the permitted charging
temperature range.
After charging is complete and the light on the charger is green,
disconnect the cable from the battery port and power cord from wall
socket. If you have charged the battery in the bicycle frame, carefully
insert the rubber plug after charging, so that no dirt or water can
enter the battery port.
To prevent serious injury or death:
• Only place battery pack on clean surfaces.
Avoid getting dirt, e.g.
sand or soil, in the charging port and contacts.
• Do not charge or use battery pack if it is damaged.
Contact
Lectric eBikes to order a replacement.
Installing and Uninstalling Battery Pack
Your bike comes with a 48V lithium-
ion battery. The bike’s battery
comes with a unique set of keys
that are used to turn it on/off as
well as keep it unlocked/locked to
the frame.
The battery has 3 key positions:
UNLOCKED, OFF, and ON. These
positions are marked on the battery
and can only be seen when the
battery is removed from the bike.
WARNING!