Lectranator Systems 27315, Руководство по установке и эксплуатации

Страница: 8 / 26

2. Purifier Production/ System Sizing/ "Rules of Thumb"
While purifier demand varies beyond precise prediction, and you may desire a higher or lower
purifier resid ual in your pool, the following "rules of thumb" will assist you in properly selecting
the correct LIBERTO model.
1. A Control Panel with a CP3 cell , operated at maximum output (3.0 Amps), at 3000 ppm salt
residual will produce Sodium Hypochlorite equivalent to 0.11 kg of chlorine in 24 hours of
continuous operation.
This amount of chlorine could satisfy up to 37,000 L of pool water, depending on the 8
demand variables for purifier.
2. A Control Panel with a CP5 cell , operated at maximum output (3.0 Amps), at 3000 ppm salt
residual will produce Sodium Hypochlorite equivalent to 0.22 kg of chlorine in 24 hours of
continuous operation.
This amount of chlorine could satisfy up to 57,000 L of pool water, depending on the 8
demand variables for purifier.
NOTE: Residual salt levels must be maintained above 2800 ppm and below 3200 ppm. Do not
exceed 3200 ppm salt residual if you object to salty tasting water!
Normal System Sizing Guide
The sizing criteria below reflects " normal " conditions based on field experience and proper
operation.
Purifying "demand" varies from one pool to another.
Percent of
Purifier Provided
100%
75%
50%
25%
CP3 CELL CP5 CELL
Litres
18,500 37,000 57,000
POOL SIZE
Assumes "Normal" Demand @ 10 Hours Per Day Operation
System Sizing for Swimming Pools (Continued)
Section 1 a
4