www.lec-commercial.co.uk
10
Internal Light
Lec Commercial bottle coolers are fitted with internal fluorescent lights that can be
switched on and off using the red switch located at the bottom of the cabinet adjacent to
the controller.
The light should be turned off whenever it is not required, in order to save energy and
keep your running costs down.
Doors
On all ECA approved models, the door is opened by means of a handle screwed onto the
front of the door. All doors are fitted with a self closing mechanism for energy efficiency
and your convenience. Should for any reason, the self closing mechanism fail, to close
the door apply a gentle pressure until the magnetic door gasket seals against the cabinet
face.
Do not "slam close". Check periodically that there are no gaps between the gasket and
the cabinet face as this will cause the bottle cooler to operate less efficiently.
Shelves
The Bottle Cooler is fitted with adjustable shelves that can be moved to
suit your storage needs. The support clips (right) are removed by
pressing them together and tilting them upwards.
On the double door models, you will notice that there are vertical
centre rails positioned at the front and back of the interior. Ensure that
the clips are also positioned on the vertical centre rails to fully secure
shelves in place. Check that all the clips are level and at the correct
height before positioning the shelves.
WARNING:
Maximum loading capacity per shelf is 20kg
Adjusting the feet
Your Lec Commercial bottle cooler comes fitted with 2 adjustable
front feet as standard. If placing on an uneven surface, you may need
to adjust the feet. Simply tilt the unit back
slightly
to adjust the
height.
To extend
the height level of the feet, simply twist/unscrew the feet
clockwise until you reach desired level.
To reduce
the height level of the feet, twist/screw the feet anti-
clockwise until you reach desired level.
6
Support clips
