ON/C – Use this button to turn ON the cash register. Press and hold to clear line items and
transactions from the LCD DISPLAY.
OFF – This button will shut down the Teaching Cash Register at the end of play. There is also an
automatic shutoff after five minutes of inactivity to conserve battery life.
RESET – If the register begins to behave erratically, press the RESET button located just above the
battery compartment on the bottom of the unit. Use the tip of a paperclip or pen to depress the
button. If this doesn’t solve the problem, please refer to the Use and Care section of this manual.
NUMBER KEYS – These are the main buttons that your child will use during play and learning
activities.
FUNCTION KEYS – Use these keys to add or subtract items or amounts of money, to multiply
amounts when buying several of one item, or to divide if an item is “2 for 1” and you only want one
item.
ENTER KEY – Press this key to accept an entry.
LEARNING ACTIVITIES KEYS – Press any one of these keys to begin a learning activity.
COINS – Press this button to display the total of the coins in the COIN BANK.
COIN QUIZ – Play this fun game to learn the different coins and their values.
+ ADD – This game features three levels of addition activities.
- SUB – This game features three levels of subtraction activities.
MONEY MATCH – Play this game by listening to the amount and entering it with the
number keys.
OPEN – This button opens the drawer on the Teaching Cash Register.
PAY$ – Press this button after “ringing up” all your purchases to select how you want to pay.
COINS SLOT – Insert a coin into the slot at any time to hear it identified. See how much the coin is
worth on the LCD DISPLAY.
COIN BANK – Lift this door to release all the coins and continue play.
SCALE CALIBRATION WHEEL – This wheel is located on the back of the register.
Turn the dial until the guideline on the scale aligns with the first line on the graph. NOTE: This is a
pretend scale and is not accurate.
Getting Started
You will need:
3 C batteries, Phillips screwdriver
Installing the batteries:
Using the Phillips screwdriver, turn the screw on the battery door on the
bottom of the register in a counterclockwise direction to loosen the screw.
Remove the screw and open the door. Insert the three C batteries, being
careful to match the + and – ends of the batteries to the diagram inside the
battery compartment. Replace the battery-compartment door and insert the screw. Tighten the
screw with the Phillips screwdriver by turning the screw in a clockwise direction until secure.
Please read and understand the other important battery usage instructions later in this manual.
Calibrate the scale so that the indicator bar is lined up with the zero on the scale graph. Find the
calibration wheel on the back of the unit. Turn the wheel until the bar is in the correct position.
Press the ON key to begin the learning activities. Now we are ready for learning fun!