Leader LV 7290 Скачать руководство пользователя страница 3

I

 

GENERAL SAFETY SUMMARY 

  Read This before Using the Instrument 

This instrument should only be used by persons with sufficient knowledge of electronics who 
thoroughly understand the contents of this manual. 

 

This instrument is not designed or manufactured for households or ordinary consumers. 
If unqualified personnel are to use the instrument, be sure the instrument is handled under the 
supervision of qualified personnel (those who have electrical knowledge). This is to prevent the 
possibility of personal injury or damage to the instrument. 

  Note about Reading This Manual 

The contents of this manual contain specialized terminology and may be difficult to understand. If 
you have any questions about the contents of this manual, please contact your local LEADER 
agent. 

  Symbols and Terms 

The following symbols and terms are used in this instruction manual and on the instrument to 
indicate important warnings and notes. 

 

<Symbol> 

 

This symbol appears in this instruction manual and on the instrument to 
indicate an area where improper handling could result in personal injury, 
damage to the instrument, or malfunction of the instrument or devices 
connected to it. 
When you encounter this symbol on the instrument, be sure to refer to the 
information in this instruction manual that corresponds to the area that the 
symbol marks. 

<Term> 

 

Ignoring the precautions that this term indicates could lead to death or 
serious injury. 

<Term> 

 

Ignoring the precautions that this term indicates could lead to personal injury 
or damage to the instrument. 

Содержание LV 7290





















Отзывы: