11. ETHERNET REMOTE CONTROL
106
11.1.3
TELNET Commands
TELNET commands follow the LV 7770 or the unit menu structure. For explanations of each
item, see the LV 7770 or the unit instruction manual. Depending on the current settings,
some of the items that are described in this manual may be invalid.
Table 11-1 LV 7770 commands
Command
Parameter
INPUT:UNIT
SDI / CMP / ?
INPUT:CH
A / B / AB / ?
INPUT:SIMUL
ON / OFF / ?
INPUT:STREAM
1 / 2 / ?
EXT
INT / EXT / ?
DISPLAY
1 / 2 / 3 / 4 / ?
MULTI
ON / OFF / ?
MODE
WFM / VECTOR / PICTURE / AUDIO / STATUS / EYE
/ ?
RCLL
1 to 60
CAP:TRIGGER
MANUAL / ERROR / ?
SYS:FORMAT:MANUAL_SELECT
AUTO / MANUAL / ?
SYS:FORMAT:I_PSF
INTERLACE / SEGMENTED_FRAME / ?
SYS:FORMAT:LINK_FORMAT
HD / SD / HD_DUAL / 3GA / 3GB / 3GB_2MAP / ?
SYS:FORMAT:COLOR_SYSTEM
YCBCR_422 / YCBCR_444 / RGB_444 / ?
SYS:FORMAT:PIXEL_DEPTH
10BIT / 12BIT / ?
SYS:FORMAT:SCANNING
1080P / 1080I / 1080PSF / 720P / 525I / 625I / ?
SYS:FORMAT:ACTIVE_SAMPLE
1920 / 2048 / ?
SYS:FORMAT:FRAME_RATE
60 / 59.94 / 50 / 30 / 29.97 / 25 / 24 / 23.98 / ?
SYS:FORMAT:INPUT:A
?
(Return value: Link Format / Scanning / Frame Rate /
Color System / Pixel Depth / Active Sample /
NO_SIGNAL / UNKNOWN)
* When Scanning is set to I, Frame Rate is converted
to field frequency.
* When Scanning is set to 720P, 525I, or 625I, return
values for Pixel Depth and later items are not output.
* When the input signal is COMPOSITE, Link Format is
set to NTSC or PAL, and the return values for Color
System and later items are not output.
SYS:FORMAT:INPUT:B
? (Return value: same as above)
SYS:REAR:SDI_OUTPUT
A_B / A / ?
SYS:REAR:AUDIO_BNC:GRP_A
INPUT / OUTPUT / ?
SYS:REAR:AUDIO_BNC:GRP_B
INPUT / OUTPUT / ?
SYS:REAR:AUDIO_BNC:GRP_A:OUT_SEL DISP_SRC / SDI_1_8 / ?
SYS:REAR:AUDIO_BNC:GRP_B:OUT_SEL DISP_SRC / SDI_9_16 / ?
SYS:REAR:ANALOG_AUDIO
INPUT / OUTPUT
SYS:REAR:DVI_I:ASPECT
4_3 / 16_9 / 16_10 / ?
SYS:REAR:PIC_MONI_OUT:COLOR
AUTO / YCBCR_422 / YCBCR_444 / RGB_444 / ?
