2. SPECIFICATIONS
6
●
Wide Variety of Display Formats (LV 5770SER08 and LV 5770SER09A)
In the video signal waveform display, vector display, and picture display, the LV 7770 can
display up to two input SDI signals on top of each other or side by side. This makes it
suitable for adjusting the gain and black balance values of two video signals. In the video
signal waveform and vector displays, the LV 7770 can make different input channels
easier to see by displaying them using different colors.
●
Extremely Flexible Display Layouts
The 1-screen display feature can be used to show each of the different displays on a
single screen, or the 4-screen multi display feature can be used to divide the screen into
four areas with a different display shown in each area. The video signal waveform display,
picture display, audio level meter display, and histogram display can be shown as a
thumbnail display on the 1-screen display.
●
Capture Feature
A screen capture feature that captures the screen as still images, a frame capture
feature that captures single frames of SDI signals, and an error capture feature that
automatically detects and captures error frames are available.
Not only can captured data be displayed by the LV 7770, but it can also be compared
with an input signal or saved to a USB memory device. It is easy to view the saved data
on a PC.
●
XGA Resolution DVI-I Output
The measurement display has XGA resolution (an effective resolution of 1024 × 768) and
can be output from the DVI-I connector, which supports single-link TMDS. The aspect
ratio can be switched between 4:3, 16:9, and 16:10. (The display must have a resolution
conversion feature.)
●
Picture Monitor Output (LV 5770SER08 and LV 5770SER09A)
The input SDI signal can be generated as an 8-bit signal. Regardless of the SDI input
signal, the output format can be set to YC
B
C
R
4:2:2, YC
B
C
R
4:4:4, or RGB 4:4:4.
●
3D Assist Display (LV 5770SER08 and LV 5770SER09A)
3D video signals can be evaluated by applying the video signal for the left eye to channel
A and the video signal for the right eye to channel B. The available picture display
formats are anaglyph, convergence, overlay, wipe, checker, and flicker.
●
CINELITE (LV 5770SER08 and LV 5770SER09A)
You can use the cursor to select any 3 points and display their luminance information
using f-Stop numbers, percentage values, or level values. You can choose to analyze a
single pixel or a small area by setting the size of the measured area to 1 pixel or to the
average value for 9 or 81 pixels.
Furthermore, the CINELITE Advanced feature makes it possible to synchronize
measurements with the video signal waveform display and vector display.
