7. SYSTEM SETTINGS
82
7.7
Initializing Settings
To initialize the settings, press
F•7
INITIALIZE on the system menu.
To proceed with the initialization, press
F•1
INIT YES. To cancel the initialization, press
F•3
INIT NO.
SYS
→ F•7
INITIALIZE →
Figure 7-10 INITIALIZE menu
When you initialize the settings, all the settings—excluding those listed below—are initialized.
For information about the default values, see chapter 12, “MENU TREES.”
If you want to initialize the following settings as well, see the factory default settings in the
following section.
•
Ethernet settings (ETHERNET SETUP)
•
Remote control settings (REMOTE SETUP)
•
Date and time settings (DATE&TIME)
•
Preset contents
•
The panel settings that are registered to the SHORTCUT key
•
The CINELITE user-defined correction tables
●
Factory Default Settings
To initialize all items other than the date and time, hold down the V POS and H POS knobs
while you turn the power on. Press
F•1
YES when the following screen appears.
Figure 7-11 Factory default settings
