Le Maitre Chameleon, Руководство пользователя

Страница: 3 / 13

3
The Chameleon should be regularly checked and serviced as required
relating to the frequency of use and the application conditions.
The Chameleon is commanded by instructions using the DMX protocol.
The manufacturer cannot be held responsible for incorrect application or
malfunction of data sent via this medium. Each DMX address must be
correctly set and stored as per the manual instructions.
Should DMX isolation or other devices be required for the safe application
of DMX control then this will be deemed the responsibility of the operator.
It is repeated that the use of the Chameleon in any form by untrained
or unqualified personnel will relinquish the manufacturer of all
responsibility relating to any consequence.
Operational Guidance and Notes:
Risk assessment, Usage, Compliance with Authority requirements, Effect
demonstration, Approval, Safety distances, Fire prevention, Fire
procedures, Emergency fail equipment and procedures. These and local
legislation must all be taken into account before the Chameleon can be
used.
It must be stated that under no conditions should the Chameleon be
modified or used in an exposed condition that might lead to injury of
any kind. (fire, explosion, burns, electric shock etc)
Follow all of the recommended safety procedures and safety
distance guidance.
Do not insert, change, remove canisters in any environment that
could induce ignition. i.e. Smoking, open flame, spark contacts or
hot surfaces, including a recently fired machine.
Do not attempt to move the Chameleon until it has cooled, or
attempt to lift it by the grilled flue cover.
The Chameleon is not designed for continual flame use. It is
intended for fire ball and short duration flame bursts. Ie. Typical 5
second bursts maximum.