LeGriddleUS.com | [email protected]
Make sure the control knobs are in the off position. The Griddle must be connected using the
3/8 flare
connection
.
The hose length must be suitable for your use and visible along its entire length, without
exceeding 5ft.
Check that the flexible hose is in good condition and do not hesitate to change it if it looks
cracked or damaged. The flexible hose must not be twisted or pulled and must not come
into contact with hot parts of the appliance. After connecting the hose to the appliance,
connect the pressure regulator to the hose and the gas cylinder, following the instructions
supplied with the pressure regulator and the hose. Then check for gas leaks as follows:
Check for leaks using soapy water, away from any heat sources (cigarette, electrical
appliance, etc.).
Never test for leaks using a flame.
•
Put soapy water on all the connections, turn on the gas inlet and check whether any
bubbles form.
•
The presence of a bubble = gas leak; shut the gas cylinder or gas supply and tighten
the connections again. Repeat the test for leaks.
•
If the leak persists or comes from another part, do not use your Griddle and contact the
manufacturer.
DANGER:
NEVER USE AN APPLIANCE THAT LEAKS.
