DigitalBooster DB-4 – Manual
-
1
-
Content:
Page
1.
Preface / Safety Instruction
2
2.
DB-4 connection to the digital command station or to other
boosters
3
2.1. DB-4 connection via the 5-poles Boosterbus
3
2.2. DB-4 connection via the CDE-Boosterbus
5
2.3. DB-4 connection via the Roco-Boosterbus
5
3.
DB-4 connection to the Switched Mode Mains Power
Supply DB-4 PowerSupply
6
4.
DB-4 connection to an Own Track Section
6
4.1. 3-conductor Track System
7
4.2. 2-conductor Track System
9
5.
Booster in Operation
10
6.
Adjusting Operation Modes with Jumper
10
6.1. Select Maximum Digital Current to 2,5 or 4,5 Ampere
10
6.2. Select data format for WatchDog- and
On-/Off-switch function
11
6.3. RailCom
®
*
-cutout Creation or Suppression
11
6.4. Short Circuit Report to the Command Station (Short Report) 11
6.5. Automatic Switch-On (Auto Go)
12
7.
Addresses for WatchDog- and On-/Off switch function
12
7.1. Common Address Section
13
7.2. Own Address Sections
13
7.3. Programming address sections
14
8.
WatchDog: Communication with the Model Railway Software 15
9.
DB-4 switching On and Off via Accessory Address
16
10. DB-4 switching On and Off via external push button
16
11. Feedback Report for Booster-Management
18
12. Assembly Plan of the Basic PC-board
19
