LDT DigitalBooster DB-4, Инструкция по сборке

Страница: 8 / 22

DigitalBooster DB-4 – Manual
-
5
-
2.2. DB-4 connection via the CDE-Boosterbus:
If your
Command Station contains a CDE-Boosterbus the connection to the
DigitalBoosters DB-4 can be realized with three cables. Connect the connection
wires C , D and E of the Command Station with the clamps C , D and E of the
following DigitalBooster DB-4 .
BU1
+
S1
DCC
MM
JP1 JP2 JP3 JP4
OFF
ON Auto
Go
RailCom
ShortReport
red brown
LED1 LED2
GO STOP
+
Littfinski DatenTechnik (LDT)
KL1
K J
4,5
2,5
JP5
OUT IN
ST1 ST2
Rev. 1.4
DB-4
BU3 BU2
C D E STOP/GO
KL2 KL4 KL3
Feedback
A
T
2,5 / 4,5 Ampere Booster für die Digitalformate Märklin-
Motorola, mfx
® , M4 und DCC.
2,5 / 4,5 ampere booster for Märklin-Motorola, mfx ® , M4
and DCC.
DB-4
DigitalBooster
Multi-Digital
L ittfinski D aten T echnik ( LDT )
D-25492 Heist
www.ldt-infocenter.com
Digital-Profi werden!
braun
brown
J
rot
red
K
Vom DB-4-PowerSupply 2
From DB-4-PowerSupply 2
Gleisbereich 2
Track section 2
BU1
+
S1
DCC
MM
JP1 JP2 JP3 JP4
OFF
ON Auto
Go
RailCom
ShortReport
red brown
LED1 LED2
GO STOP
+
Littfinski DatenTechnik (LDT)
KL1
K J
4,5
2,5
JP5
OUT IN
ST1 ST2
Rev. 1.4
DB-4
BU3 BU2
C D E STOP/GO
KL2 KL4 KL3
Feedback
A
T
2,5 / 4,5 Ampere Booster für die Digitalformate Märklin-
Motorola, mfx
® , M4 und DCC.
2,5 / 4,5 ampere booster for Märklin-Motorola, mfx ® , M4
and DCC.
DB-4
DigitalBooster
Multi-Digital
L ittfinski D aten T echnik ( LDT )
D-25492 Heist
www.ldt-infocenter.com
Digital-Profi werden!
braun
brown
J
rot
red
K
Vom DB-4-PowerSupply 1
From DB-4-PowerSupply 1
Gleisbereich 1
Track section 1
Von Digitalzentrale
From command station Zu weiteren Boostern
To further boosters
C
D
E
C
D
E
Connecting the DigitalBooster DB-4 with the Command Station via CDE-Boosterbus and between
each other
2.3. DB-4 connection via the Roco-Boosterbus:
With the
Roco Boosterbus-Cable ( Order Code: Kabel Roco 1m, Part-No.: 000136 ),
is it possible to connect the DigitalBooster DB-4 with the multiMAUS,
multiZENTRALEpro or z21 and Z21 command stations according to the table or to
connect the DB-4 to a Roco Booster . The first booster has to be connected always to
the command station by using a Roco Boosterbus-Cable. The second booster has to
be connected to the first one etc.