background image

SAFETY INSTRUCTIONS

1. Please read these safety instructions carefully.
2. Keep this User's Manual for future reference.
3. Unplug the equipment from the AC power supply before cleaning.
4. Do not use liquid or aerosol cleaners. Do not allow the unit to get wet.
5. Keep this equipment away from humidity.
6. Lay this equipment on a reliable flat surface before setting it up. If you don’t do so, the

equipment can fall down and get damaged. 

7. Place the power cord so that it is not likely to be walked on or pinched by having objects

placed on it.

8. Always take into account all warnings and equipment precautions.
9. In order to avoid electric overload, unplug the equipment from the wall outlet if it is not

going to be used for several days. Never pour liquid into the grilles, it could cause fire or
electric shock.

10. Do never open the equipment. For safety reasons, the equipment should only be opened

by qualified staff.

11. Pay attention to polarity when using a DC power supply. Reverse polarity may damage the

equipment or the power supply.

12. If any of the following situation arises, get the equipment checked by a service technician:

a) The cable or power plug is damaged.
b) Liquid was poured into the equipment.
c) The equipment has been exposed to moisture. 
d)  The equipment has not been working well or you cannot get it work according to this
manual.
e) The equipment have fallen down and it is damaged.
f)  The equipment has obvious sign of breakage 

13. Disconnect the audio inputs and outputs while making connections. Make sure to use the

proper cables to make the connections.

Содержание LDAVAP1





























Отзывы: