6
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
8
CABLE STRAIN RELIEF
Use the strain relief for the flexible cable of the power adapter to protect the transmitter’s low-voltage connector and the power adapter’s
low-voltage plug
from unintentional damage and to avoid pulling out the connector inadvertently.
9
AF INPUT LEFT / RIGHT
XLR/6.3 mm jack combination socket for the left and right input channel (XLR = symmetric, jack = asymmetric).
10
ANTENNA
BNC connector for the provided transmitter antenna.
11
TRANSMITTER ANTENNA
Transmitter antenna with BNC connector.
14
12
15
13
16
17 18
19
12
DISPLAY
Illuminated DC display with dual functions. When switched on, the display illu-
minates for several seconds and shows the channel number currently set. If the
batteries have low power, the display begins to flash red.
13
C / -
Switch to select radio channels 1 to 12. Press and hold one of the two buttons for
approx. 2 seconds in order to change the setting. The currently set channel
number will begin to flash and you can select the desired radio channel using the
+ and - buttons. The flashing stops after approx. 5 seconds, the display
illumination goes out, and the selected radio channel is activated. In order to
establish a radio connection between the transmitter and receiver, the channel
number or radio frequency of both devices must match.
14
ANTENNA
Antenna of the pocket receiver. For optimal reception, do not obscure or bend.
15
BATTERY COMPARTMENT
To replace the batteries, open the battery compartment of the
pocket receiver by simultaneously pressing on the markings on both sides of the
battery compartment cover and open the cover towards the front. Remove the
used batteries and insert fresh batteries (2x AA/LR6, alkaline) as depicted in the
battery compartment. Now fold the battery compartment cover back onto the
housing until the lid clicks into place. Do not use the receiver for extended periods
of time, and please remove the batteries in order to prevent damage to the
receiver due to leaky batteries.
