LD LDDSP45K, Руководство пользователя, Страница: 16 / 136

16
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
•••
9.60 Display / Input Field - Displays the value and allows direct input via keyboard.
9.61
Bypass - Check box to deactivate PEAK DYNAMIC CONTROL.
9.62
Graphic depiction of both dynamic control units (gray area = RMS DYNAMIC CONTROL, white line = PEAK DYNAMIC).
9.63 OUT SELECT - Select the desired channel for editing by clicking on the channel button.
9.64 AMPLIFIER INFORMATION - Input and output specifications of the amplifier.
9.65
SPK Z - Collapsible menu to configure the speaker impedance.
9.66
Multi-way - Check box to activate the 2-band limiter.
MULTI-WAY LIMITER
9.67 Low Freq. - Limiter for the low band. Click button to edit (highlighted in light gray).
9.68 High Freq. - Limiter for the high band. Click button to edit (highlighted in light gray).
9.69
Virtual Fader - Click and hold the Virtual Fader button and move it upwards or downwards to set the crossover frequency
between the low and high band.
9.70 Display / Input Field - Displays the crossover frequency and allows direct input via keyboard.
9.71 Graphic depiction of both dynamic control units (gray area = RMS DYNAMIC CONTROL, white line = PEAK DYNAMIC
CONTROL low band, black line = PEAK DYNAMIC CONTROL high band).
9.72 LIMIT - Click on the arrow icon to adjust the limiter to the peak capacity of the speaker.
9.73
Virtual Fader - Click and hold the Virtual Fader button and move it upwards or downwards to adjust the limiter to the
peak capacity of the speaker.
9.74 Display / Input Field - Displays the limitation in watts PEAK and allows direct input via keyboard.
9.75 Auto TC - Check box to automatically set Attack and Release.
9.76 ATTACK - Allows manual configuration of the response time via the arrow icons and direct input via keyboard (uncheck box for Auto TC).
9.77
RELEASE - Allows manual configuration of the release time via the arrow icons and direct input via keyboard (uncheck box for Auto TC).
9.78 KNEE - Click on the arrow icon to adjust the characteristic curve to the height of the threshold value (in this case, W PEAK)
(low value = hard transition between raw and processed signal, high value = soft transition between raw and processed signal).
9.79 Virtual Fader - Click and hold the Virtual Fader button and move it upwards or downwards to adjust the characteristic
curve to the height of the threshold value (in this case, W PEAK).
9.80 Display / Input Field - Displays the value and allows direct input via keyboard.
9.81
Bypass - Check box to deactivate PEAK DYNAMIC CONTROL.
9.67
9.68
9.81
9.78
9.72
9.75
9.73
9.76
9.77
9.72
9.74
9.80
9.78
9.70
9.79
9.69
9.71