LD LDDSP45K, Руководство пользователя, Страница: 15 / 136

15
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
•••
SPEAKER DYNAMIC CONTROL
SPEAKER RMS DYNAMIC CONTROL
9.38 LIMIT - Click on the arrow icon to adjust the limiter to the RMS capacity of the speaker.
9.39
Virtual Fader - Click and hold the Virtual Fader button and move it upwards or downwards to adjust the limiter to the RMS capacity
of the speaker.
9.40
Display / Input Field
- Displays the limitation in watts RMS and allows direct input via keyboard.
9.41 RATIO - Click on the arrow icon to configure the control ratio when using as a compressor.
9.42 Virtual Fader - Click and hold the Virtual Fader button and move it upwards or downwards to set the control ratio when using as a
compressor.
9.43
Display / Input Field - Displays the control ratio and allows direct input via keyboard.
9.44
KNEE
- Click on the arrow icon to adjust the characteristic curve to the height of the threshold value (in this case, W RMS)
(low value = hard transition between raw and processed signal, high value = soft transition between raw and processed signal).
9.45 Virtual Fader - Click and hold the Virtual Fader button and move it upwards or downwards to adjust the characteristic
curve to the height of the threshold value (in this case, W RMS).
9.46 Display / Input Field - Displays the value and allows direct input via keyboard.
9.47
RMS DETECTOR
BYPASS - RMS DYNAMIC CONTROL
disabled (click button).
COMPRESSOR - Use as compressor (click button).
LIMITER - Use as limiter (click button).
9.48
Auto TC - Check box to automatically set Attack, Hold Time, and Release.
9.49
ATTACK
- Allows manual configuration of the response time via the arrow icons and direct input via keyboard (uncheck box for Auto TC).
9.50 HOLD TIME - Allows manual configuration of the hold time via the arrow icons and direct input via keyboard (uncheck box for Auto TC).
9.51 RELEASE - Allows manual configuration of the release time via the arrow icons and direct input via keyboard (uncheck box for Auto TC).
SPEAKER PEAK DYNAMIC CONTROL
9.52 LIMIT - Click on the arrow icon to adjust the limiter to the peak capacity of the speaker.
9.53 Virtual Fader - Click and hold the Virtual Fader button and move it upwards or downwards to adjust the limiter to the
peak capacity of the speaker.
9.54
Display / Input Field - Displays the limitation in watts PEAK and allows direct input via keyboard.
9.55
Auto TC
- Check box to automatically set Attack and Release.
9.56 ATTACK - Allows manual configuration of the response time via the arrow icons and direct input via keyboard (uncheck for Auto TC).
9.57 RELEASE - Allows manual configuration of the release time via the arrow icons and direct input via keyboard (uncheck box for Auto TC).
9.58
KNEE - Click on the arrow icon to adjust the characteristic curve to the height of the threshold value (in this case, W PEAK)
(low value = hard transition between raw and processed signal, high value = soft transition between raw and processed signal).
9.59
Virtual Fader
- Click and hold the Virtual Fader button and move it upwards or downwards to adjust the characteristic
curve to the height of the threshold value (in this case, W RMS).
9.62
9.38
9.39
9.41 9.44
9.45
9.42
9.38
9.40
9.41
9.43
9.46
9.44
9.47
9.52
9.53
9.49
9.50
9.51
9.52
9.54
9.55
9.56
9.57
9.58
9.59
9.58
9.60
9.66
9.61
9.63
9.65 9.64
9.48