Instructions for use 739 947
Page 6/6
LEYBOLD DIDACTIC GMBH
.
Leyboldstrasse 1
.
D-50354 Hürth, Germany
.
Phone +49 2233 604-0
.
Fax +49 2233 604-222
.
e-mail: info@leybold-
didactic.de
by Leybold Didactic GmbH
Printed in the Federal Republic of Germany
Technical alterations reserved
Fig. 13 - Entering the interface parameters
If you want to read out «hardware revision», for example,
you will find a reference in the manufacturer information
that the hardware revision number is located in register
1030
. The terms «address» and «register» are sometimes
used interchangeably.
In the program you also enter:
Address:
1030
(no offset or offset=0)
Value/data type:
16 bit
(if necessary)
Function:
0x03
(read access)
Now start the requirement diagram with a «SEND» command or
similar
Fig. 14 - Reading out a register value
As a result, the charging controller returns the revision number
that is displayed in the software (in the example here, «5»
).
Use this procedure to set register «4010» to «1», for ex-
ample, in order to allow vehicles with charging status «D»
(ventilation required) without error messages (see point
2.1).
5. Monitoring software
Follow the steps to establish a connection as described under
4.2. You can download
at the time this document was cre-
ated
the «
EV CC Device Monitor
» program from PHŒNIX
CONTACT in order to display various information directly and
make changes.
Caution: improper handling can put the de-
vice in a state that no longer permits a factory reset!
Start the program, agree to the licence then enter the interface
parameters and click the button «Connect». Available parame-
ters will be shown automatically, changing parameters is simply
made by entering and confirming the new value.
o
6 Maintenance
The device does not require special maintenance. Only the test
button of residual current circuit breaker
13
must be pressed
every month.
7 Technical data
•
Power supply: 3x400 VAC, 50 Hz, 16 A
•
Connection CEE socket 400 V/16 A, 6h
•
Output voltage: 3x400 VAC, 50 Hz, 2 A
•
Connection CEE plug 400 V/16 A, 6h
•
Charging socket: Type 2, 16 A
•
Weight: approx. 25 kg
•
Protection class 1
8 Disposal
Do not dispose of electric and electronic products
with normal household waste. Dispose of the un-
usable product in accordance with the applicable
statutory requirements.
