Wyvern Timer 2000R Operating Instructions
25
Key Switch (2000RMP)/EM Button (2000REM)
An optional key switch or EM button can be factory fitted to the front panel of the timer, to the
left of the display. The key switch can be used to over-ride the timer function, for example during
snooker competitions or during servicing of equipment. When activated ‘PL’ is displayed. The
EM button can be programmed to take the form of an emergency stop button (panic mode) for
immediate power turn off and ‘E5P’ is shown on the display when pressed. Alternatively, using
special option code 07, the EM button may be configured to initiate a timed manual override
function (DPL mode, see page 40), typically for washing machine applications. Program code
24 selects key switch or EM button function as shown below. A further option (program code 28)
allows the key switch to control the operation of the fan output.
Program
Code
Description Maximum
Value
Value Used
24
Key switch input function
Play=ON
EM=OFF
-
28
When keyswitch is active, fan
output is on=ON
When keyswitch is active, fan
output is off=OFF
-
Special
Code
Description Maximum
Value
Value Used
07
EM button in panic mode = OFF
EM button in DPL mode = ON
-
Key Switch/EM Button Programming Codes
Network Control Option (2000RCN only)
Network control of the Wyvern 2000R allows the connection of multiple timers controlled from a
single PC or the Sigma console. Used with commercial tanning software or the Sigma console
all timers connected to the network may be controlled from a reception area. Real time
information allows the status of each bed to be centrally monitored. Each timer is assigned its
own unique id number and this is allocated with program code 64. The network interface module
must be fitted and program code 3040 selected for network control. The remote display module
(which allows the timer display to be seen in other locations) and failsafe monitor also work in
conjunction with the network option.
Program
Code
Description Maximum
Value
Value Used
64
Set timer id from 01 to 99
99
Network Control Selection Code
