LM210-20 AND LM210-30 SERIES BURNER CONTROLS
LM210-20
LM210-30
LIGHTING YOUR GRILL
Make sure control knobs are in the ‘OFF’ position.
For Natural Gas (NG) grills, turn the main gas
control to ON. The valve is ON when the valve
lever is in line and parallel to the gas piping and
gas flow.
For Propane (LP) grills, turn the propane cylinder
valve at least one full turn in the counterclockwise
direction.
LIGHTING PROCEDURE
Remove the weather cover from your grill.
Assure that the main gas source is turned
on, as shown above. Rotate the control
knob in a COUNTERCLOCKWISE direction
until the knob pointer is facing UP (HIGH
position).
AT THE SAME TIME, depress the
IGNITION switch on the front panel to ignite
the burner. The electronic igniter will
continue to spark as long as you depress
the switch. Once the burner is lit, you can
remove your finger from the switch.
Repeat the process for the second burner (if
you are lighting the LM210-30 model).
If, at any time, the burner does NOT light
after 5 seconds, then turn the burner control
knob to OFF and wait 5 minutes to allow
unburned gas to dissipate. After 5 minutes,
it will be safe to start the procedure again.
CONTROL
KNOB
IGNITION
SWITCH
15-
7/8”
12”
LEFT
BURNER
CONTROL
KNOB
IGNITION
SWITCH
RIGHT
BURNER
CONTROL
KNOB
12”
28
”
12
