S1 Dream-T Espresso Machine
Owner’s Manual
Page 2
Introduction
First of all, thank you for your business! You are going to love your new S1 Dream-T
espresso machine. It combines classic beauty, value, and great performance for making
the best espressos, cappuccinos, and
lattes you‟ve ever tasted! These instructions include
tips that will help bring out the Barista that‟s hidden within! Enjoy your new machine!
First Time Set Up
Remove the machine from the box and screw the legs into the threaded inserts on the
base of the machine.
Remove the water reservoir and rinse it thoroughly. It may be cleaned with mild dish
detergent, but it is not recommended for dishwasher use.
Before filling the reservoir, test your water for hardness with the provided test strips.
Fill a glass with cold tap water; dip the tip of the test strip into the water for one second,
then pull the strip out of the water and hold it horizontally for fifteen seconds. After
fifteen seconds, compare the color of the strip to the chart on the side of the package to
determine how many grains of hardness are in your tap water. The chart below will tell
you how many gallons of water can be softened before the in-tank softener needs to be
replaced.
Fill the reservoir with cold water making sure the
in-tank softener is suction cupped to the bottom in
an upright position as shown to the right.
Return the reservoir to the machine being careful not
to spill any water inside. Then push the drip tray into
place and then it will lock down into notches on each
side of the frame so the reservoir does not back out.
Warning
: Do not turn the machine on until following the procedure on the next page or
damage to the machine will occur and will not be covered under warranty.
