36
NOPULL
TM
STARTER SYSTEM
F. If the battery indicator LED does not turn on, the possible causes are as below:
1) The microswitch is broken. Replace it.
2) The wiring harness of the microswitch has detached. Re-weld it.
3) There is failed contact in the battery connector to the PCB. Adjust the battery connector (Fig. 63).
4) Battery breaks without voltage output. Use a multimeter to test if an open circuit occurs in the
fuse of the battery. If yes, replace it (Fig. 64).
Fig. 63
Fig. 64
Ŷ7KHHOHFWULFPRWRUVWDUWVWKHQVWRSVZKHQSUHVVLQJWKHVWDUWEXWWRQ$FFRUGLQJWR/('LQGLFWRUVWKH
possible causes are as below:
$,IWKHUHLVQR/('ÀDVKLQJWKHVWDUWEXWWRQPD\KDYHEURNHQRULIWKHVWDUWEXWWRQUHPDLQVSUHVVHG
for 5 seconds, the motor will stop automatically).
%7KHEDWWHU\LQGLFDWRU/('ÀDVKLQJJUHHQLQGLFDWHVDVKRUWFLUFXLWLQWKHHOHFWULFVWDUWHU&KHFNWKH
electric motor and the motor drive lines as illustrated above.
&7KHEDWWHU\LQGLFDWRU/('ÀDVKLQJUHGDQGJUHHQDOWHUQDWLYHO\LQGLFDWHVDQRYHUFXUUHQWLQWKHHOHFWULF
starter. Check if the engine is stuck and cannot be rotated smoothly.
Ŷ7KHHOHFWULFPRWRUVWDUWVQRUPDOO\EXWWKH/('GRHVQRWWXUQRQZKHQSUHVVLQJWKHVWDUWEXWWRQ
Possible causes are:
$7KHUHLVDORRVHRUIDLOHGFRQQHFWLRQRUIDOORIILQWKHFRQQHFWLRQRIWKH3&%RU/('SDQHOWRWKHÀDW
cable.
B. The LED panel is broken.
Ŷ7KHHQJLQHFDQQRWEHVWRSSHGZKHQSUHVVLQJWKHVWRSVZLWFK7KHSRVVLEOHFDXVHVPD\EHWKDWWKH
stop switch has failed or the wiring harness of the stop switch has broken. Check as below:
2SHQWKHKDQGOHDVVHPEO\GLVFRQQHFWWKHPDOHDQGIHPDOHWHUPLQDOVRIWKHVWRSVZLWFKZLULQJ
harness (covered by two transparent insulation covering) (Fig. 65):
A. Press the stop switch, and test the two pins of the stop switch wiring harness using the resistance
stall of multimeter (Fig. 66). If conduction fails, the possible causes are: The stop switch has broken.
Fuse
Microswitch
Battery Connector
Содержание NPTBL26A
Страница 6: ...6 PARTS AND FEATURES NPTBL26A EXPLODED VIEW...
Страница 40: ......
