LawnMaster NPTBL26A, Руководство по обслуживанию

Страница: 34 / 40

34
NOPULL TM STARTER SYSTEM
Special troubleshooting instructions for No-Pull™ Start Button (See Figs.
59-67)
Lift the start button cover and press the start button to start the electric motor. Release the start button
after the electric motor started, the motor will stop (Fig. 59).
NOTE: When the start button is kept pressed, the electric motor will run for about 5 seconds then it will
stop automatically. When this occurs, release the start button and press it again to re-start the electric
motor.
During the starting process, the LED will indicate the battery voltage as below if there is no alarm
indicator:
Tolerance is ±0.1V
Troubleshooting
Ŷ7KHHOHFWULFPRWRUGRHVQRWVWDUWZKHQWKHVWDUWEXWWRQLVSUHVVHG$FFRUGLQJWR/('LQGLFWRUVWKH
possible causes are as below:
$7KHEDWWHU\LQGLFDWRU/('ÀDVKLQJ\HOORZLQGLFDWHVWKHEDWWHU\FHOOLVWRRKRWDQGQHHGVWRFRROWR
room temperature (Fig. 60).
Battery Voltage LED Status
•9
Green
7.1V-7.7V Orange
6.6V-7.1V Red
Fig. 60
Battery
Cells
NTC
Fig. 59
Start
Button
LED
Stop
Switch