![LawnMaster LGBQH9200 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/lawnmaster/lgbqh9200/lgbqh9200_safety-and-operating-manual_3972728012.webp)
12
A STEELFORT PRODUCT
capacity of the generator, please refer to the
specification table for details.
STARTING THE GENERATOR
WARNING
When the generator is idle for a long time or improper
use or other factors, the battery is undercharging
so that the generator cannot be electrically started,
follow the manual start steps to control the choke
and start the generator manually. The generator will
automatically charge the battery during operation.
1.
Perform Operating checklist and remove all
loads.
2.
Turn the fuel switch to “FUEL” position.
3.
Turn the start/stop switch to “RUN” position
4.
Select according to the actual configuration of
the user.
ELECTRIC STARTING
1.
Press the engine switch button to enter standby
mode.
1.
2.
Press the engine switch button to start the
engine.
WARNING
If it fails to start, the generator will restart by itself.
lf it fails to start after repeated 6 times, please allow
the generator to cool for 1 minute and start again.
Sometimes the generator can take a few attempts
to start in cold weather. If machine does not start
in the first 10 seconds, wait for 30 seconds before
attempting again. If the motor turns a little then
stops when you press the Start key, it may indicate a
low battery. Charge the battery before operation or
start by recoil start.
CAUTION
During the operatoin of the unit, the battery supplies
power for the solenoid valve of the carburetor.
For this, when the unist is turned off, make sure
that the starting switch is in
“STOP”
position and
otherwise the storage battery voltage is reduced due
to the operating solenoid valve of the carburetor,
impqacting on starting for next time.
If engine is equipped with an engine oil alarm, it is
possible to prevent engine start when the engine oil
in the crancase is lower than the minimum level.
During running-in, routinely inspect the engine
oil. See maintenance section for recommended
maintenance period.
WIRELESS REMOTE START
1.
Press the engine switch button to enter standby
mode. If generator was turned off using the
remote key fob within the last 24 hours, it will
already be in standby mode.
2.
Press and hold the “ON” key for 1 second and
release it to start the generator.
Содержание LGBQH9200
Страница 21: ...21 A STEELFORT PRODUCT ...