background image

20

TECHNICAL DATA

2400W Garden Shredder FD2402

Nominal Voltage
Nominal Power Intake
Protection Class
Degree of Protection
Idling Speed
Feed Capacity
Collection Bag Capacity
Weight

Measured Sound Pressure Level (L

PA

)

Sound Power Level (L

WA

) Guaranteed

Sound Power Level (L

WA

) Measured

                                                                                  220-240V~ 50Hz             

2400W (P40)

 / II

    IP24

3940/min

Max. 40mm

Approx. 50L

12kg

84dB(A) 

107dB(A)

104dB(A)  K=3.41dB(A)

RECYCLING AND DISPOSAL

This marking indicates that this product should not be disposed with other household 
wastes. The machine must be delivered in rigid packaging to avoid damage during 
transportation. The packaging and the machine itself are manufactured from recyclable 
materials and should be disposed of accordingly.

The maximum Feed Capacity that can be shredded is dependent on the type of wood and the 
quality of the material being cut.

For hard wood (e.g. oak/beech branches), the maximum Feed Capacity that can be shredded is 
less than for soft wood (e.g. pine/spruce wood). For dry or knotted wood, the cutting thickness may 

also be less.
The equipment is intended only for use in premises in which the current bearing capacity of the 

network is >=100 A per phase and which are supplied by a distribution grid with a nominal voltage 
of 220-240V~50 Hz. You may need to check with your electricity provider if in any doubt.

If in doubt, check with your local electricity provider to verify that your mains socket has enough 
continuous current carrying capacity for this unit.
Noise and vibration values were determined according to the standards and stipulations mentioned 
in the declaration of conformity.

Technical or visual modifications may be carried out during our continuous product improvement 

programmes. All dimensions, references and information of this instruction manual are therefore 

subject to change without prior notice. Legal claims, which are made on the basis of the instruction 

manual, cannot thus be considered as valid.

Содержание FD2402

























Отзывы: