LawnMaster FD2402, Инструкция по эксплуатации

Страница: 19 / 24

19
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
The shredder will not
start.
No power supply.
Check the socket, fuse, cable, wire
and plug and have any repairs carried
out by a qualified person.
Overload protection tripped.
Wait until the motor has cooled down.
Press the reset button, and then
restart the shredder.
Lid of shredder housing is not
secured properly.
Tighten the housing interlock to
correctly secure the shredder housing.
Garden waste is not
drawn in.
Shredding material is too soft.
Use the pusher or add dry twigs/
branches.
Shredder is blocked.
Refer to Clearing a Blockage section
on page 15.
Shredding material is in discharge
duct. Remove shredding material from
discharge duct.
The shredder will not
shred properly.
Blades are blunt.
Check the blades. Turn, sharpen or
replace blades as necessary. Refer to
Reversing, Sharpening & Replacing
the Blades section on page 18.
Only perform the steps described within these instructions! All further inspection, maintenance and
repair work must be performed by a qualified specialist.
Gloves and appropriate protective clothing must be worn when performing these instructions.
Always turn off the machine, disconnect it from the power supply, and let the product cool down
before making any adjustment.
WARNING