background image

12

SAFETY INFORMATION

the shredder is working, disconnect the mains plug from 

the power supply immediately and then check the extent of 

the damage. Never use the shredder if the cable is not in 

perfect condition.

  Do not unplug the shredder by pulling on the cable, only 

pull the plug itself. Keep the cable away from heat, oil and 

sharp edges.

  Do not use the appliance if the on/off switch does not work 

properly. Always have a damaged switch repaired by a 

qualified technician.

  Do not touch the mains power supply cable under any 

circumstances.

  If the power cable for this equipment is damaged, it must 

be replaced by a qualified person in order to prevent 

hazards.

Intended Use

This shredder is designed for domestic use only:

■  The shredder is intended for shredding fibrous and 

wood-related materials such as hedge and tree cuttings, 

branches, bark and pine cones. Any use not expressly 

permitted in this manual may damage the shredder and 

pose a serious danger to the user.

■  This product is intended for private domestic use only, 

not for any commercial trade use. It must not be used for 

any purposes other than those described. Any use of the 

machine that deviates from its intended use and is not 

included in these instructions is considered unauthorised 

use and relieves the manufacturer from his or her legal 

liability.

Содержание FD2402

























Отзывы: