12
OPERATING INSTRUCTIONS
BEFORE STARTING MOTOR
Check the working area, the wood to be cut and cutting direction. If there is an obstacle,
remove it.
Ensure you have a clear working area, secure footing and a planned retreat path from falling
timber
Inspect the machine for worn, loose, or damaged parts. Never operate the machine that is
damaged, improperly adjusted, or is not completely and securely assembled.
WHEN STARTING THE MOTOR
Ensure the saw chain is not in contact with anything.
Always hold the machine firmly with both hands when the motor is running. Use a firm grip
with thumb and fingers encircling the handles.
Keep all parts of your body away from the machine when the motor is running.
OPERATION
Keep the handles dry, clean and free of oil or grease.
Use extreme caution when cutting small size brush and saplings because slender material
may catch the saw chain and be whipped toward you or pull you off balance.
When cutting a limb that is under tension, be alert for spring back so that you will not be
struck when the tension in the wood fibres is released.
Check the tree for dead branches that could fall during the felling operation.
Always turn off the motor before setting the chainsaw down.
GENERAL INSTRUCTIONS ON WORKING WITH A CHAINSAW
WARNING: Always ensure good footing. Do not use an unstable foothold, such as a ladder
or log.
Be alert to the rolling over of a cut log.
Stand on the uphill side of a cut log when working on a slope.
Do not force the chainsaw when cutting wood. Apply only light pressure. If the chain is
sharp, it will cut through the wood with ease.
Never try to continue cutting with a blunt chain. That causes the motor to overheat and the
loss of your right to claim under warranty. Always have a replacement chain at hand.
Allow the motor to cool off and take regular brakes.
After use always place the chainsaw horizontally to avoid oil dripping from the oil reservoir.
When the saw chain is caught in a cut, do not attempt to pull it out by force, but use a wedge
or a lever to open the cut.
If possible, always work with the chainsaw running at full speed.
Always use the chain cover when transporting the chainsaw.
Prevent the chain from contacting soil.
CHECKING OIL SUPPLY
After starting the motor, observe if chain oil is sprayed off (Fig.1 No15).
Be sure to refill the oil tank as soon as the chain oil level approaches minimum.