LAWN STAR LSS 2035 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 19

LAWN STAR LSS 2035 Скачать руководство пользователя страница 11

11

SAFETY DEVICES ON THE CHAINSAW

CHAIN BRAKE (Fig.11)

This chainsaw is equipped with a mechanical safety chain brake. Should the tip of the saw
blade make contact with the object being cut or any other solid object, the chainsaw may recoil
(“kick-back”). In the event of kickback, the chain brake guard (Fig.11) will be activated by the
back of the operators hand and the saw chain will be stopped.

CAUTION: The motor must be switched off before the chain brake is released. To
release the chain brake, pull the brake guard back in the direction of the handle
until locked in position

with a “click” sound.



The brake will only be activated if operating the chainsaw correctly.



Always insure that the chain brake guard is locked into the operating position (Fig.2)
before starting the chainsaw.



Check the chain brake operation before each usage by running the chainsaw for 1-2

seconds and pushing the front hand guard forward. The chain should stop immediately with
the motor at full speed. If the chain is slow to stop or does not stop, have the brake band and
clutch drum replaced or serviced before using the chainsaw.

It is extremely important that the chain brake be checked for proper operation
before each use and that the chain is sharp. Removal of the safety devices,
inadequate maintenance, or incorrect replacement of the bar or chain may
increase the risk of serious personal injury due to kickback.

CHAIN CATCH BOLT

The chainsaw is fitted with a chain catch bolt. Should the chain break when the saw is in use,
the chain bolt will catch the loose chain end and thus prevent injury to the operator’s hand.

Figure 15

Figure 14

Oil spray from
chain

3

1

2

«
...
9
10
11
12
13
...
»

Содержание LSS 2035




















Отзывы:

Нет отзывов