background image

temperedwater.com

5330 East 25th St.

Indianapolis, IN 46218
Phone (317) 261-1212

Fax (317) 261-1208

INSTALLATION &

MAINTENANCE MANUAL

Design and specifications subject to change without notice.

Please refer to 

temperedwater.com

 to ensure most

current data sheet and other design solutions. 

CAUTION: When maintaining and adjusting the 

mixing valve, all fixtures should be isolated from 

use. Lawler Manufacturing Co., Inc. recommends 

that you work safely at all times and in a manner 

consistent with the OSHA Lock/Tagout standard,  

29 CFR 1910.147 and other applicable standards.

temperedwater.com/patents

M 67 B

ASSE 1017 Approved
ASSE Lead Free Certified

Certified to CSA B125.3

NOTICE!

 

No mixing valve will work satisfactorily if improperly installed. We suggest, therefore, that you read 

these instructions carefully before installing and follow directions as outlined. Handle the mixing valve with care.

The Lawler Series 67 Water Temperature Controller has been carefully assembled and tested at the factory and 

set to deliver water at any temperature within the control range stamped on the label. At each inlet of the controller 

is a union angle combination stop and check valve with strainer which should be turned open in operation.

Series 67

Combination Thermostatic 

and Pressure Balanced 

Water Controller

This installation & maintenance manual covers all 

configurations of the Series 67.

CAPACITIES – GPM SERIES 67

 Pressure Drop PSI 

10 

20 

30 

45 

60 

80

  Valve Number 

 

 Capacity – GPM

 

67-10

 

2.5 3.5 5.5  8  10  12  14

 

67-25

 

6  10 14 18 25 30 34

1/4 gpm when properly installed in recirculated system.

CAPACITIES – LPM SERIES 67

 Pressure Drop PSI 

10 

20 

30 

45 

60 

80

  Valve Number 

 

 Capacity – LPM

 

67-10

 

9.4  13.2 22.8 30.3 37.8 45.4  53

 

67-25

 

22.7 37.8 53  68 94.6 113 128

Minimum flow for 67-10 is 1/2 Gallon Per Minute 
Minimum flow for 67-25 is 1 Gallon Per Minute

DIMENSIONS

  Valve Number 

A  N.P.T. 

B  N.P.T. 

C

 

67-10

 

1/2” 1/2”  8”

 

67-25

 

3/4” 

3/4” 

8-3/8”

Dimensions are for reference purposes only. For rough-in dimensions 
please refer to Lawler’s Revit/BIM models found at temperedwater.com.

72956_6710_STD_DRW_NODIMS.pdf

B

A

A

C

Отзывы: