Lavorwash P82.0662, Руководство пользователя

Страница: 15 / 60

CARE AND MAINTENANCE
• The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance .
• Clean the exterior part of the machine with a dry
cloth.
• Move the appliance only by catching the carrying
handle located on the motor head.
• Store the appliance and the accessories in a dry
safe place, out of the reach of children.
• A dust-technical inspection is to be carried out at least
once every year by the manufacturer or an instructed
person, e.g. for damage of the filter, tightness against
leakage of the vacuum cleaner and function of the
control unit.
• For category M vacuum cleaners that were in conta-
minated environments, the exterior as well as all ma-
chine parts should be cleaned.
• When performing maintenance and repair work, all
contaminated components that cannot be cleaned to
satisfactory must be disposed of.
• Such components must be disposed of in impermea-
ble plastic bags conforming with the valid regulations
for the disposal of such waste.
REPLACEMENT OF FILTERS
•
The machine shall be disconnected from its power
source, by removing the plug from the socket-
outlet, during cleaning or maintenance
•
Once the filter has been cleaned, check whether it
is suitable for further use. If it has been damaged
or broken, replace it with an original filter.
For the cleaning and maintenance of the filters,
follow these instructions:
The paper dust bag
The paper dust bag must be replaced when
the indicator light remains on.
Close the bag by sliding the tab 12
It is good practice however, to change the bag
regularly to guarantee optimal cooling of the
motor.
• Dispose of the filter in a suitable container according
to the applicable laws.
If the vacuum cleaner is used without the paper dust
bag, it is recommended that the dust container be
emptied and cleaned after each use; this procedure
is also recommended following the suction of any
type of liquid.
The paper cartridge filter.
It should periodically be washed only externally under
running water to avoid damage to the filter surface. It
is recommended, however, that this filter be replaced
every six months, also in relation to the frequency of
use and to the type of dirt.
The polyurethane foam filter must be cleaned regu-
larly by brushing and/or by washing with water and
neutral detergent. It is also recommended that this
filter be replaced regularly, depending on frequency
of use and type of dirt.
Air outlet filters:
Filter for motor cooling air, only for wet & dry models.
Various types (depending on the model) of air outlet
filter for all versions. These filters must be replaced
regularly with new filters at least every six months,
and in any case according to the type of dirt and fre-
quency of use.
Careful cleaning, maintenance and replacement of filters
are essential to guarantee:
- maximum efficiency of the appliance
- reduction of dust returned to the environment
- optimal cooling of the motor
GENUINE SPARES AND CONSUMABLES
Always replace parts with genuine spares. These are
available from your local store dealer. When ordering
parts always quote your model number.
After Sales Service
Should you require service at any time, please contact
your local After Sales Service.
15