Lavor ETNA 4000, Инструкция пользователя

Страница: 17 / 76

USAGE
STARTING UP
When preparing the appliance for use,
switch it off and unplug it!
- Fill the tank J with water (fig. 1)
Do not put any kind of detergent or chemi-
cal substance in the water tank!
- Fill the tank J
1
with detergent (fig. 2)
- Put (◊,+, -,*) hose on (◊,+, -,*) hole on the tank
(fig. 3)
This appliance is designed for use with the
detergent supplied or recommended by the
manufacturer. The use of other detergents
or chemicals may put the appliance’s safety
at risk!
- Fit the nozzle H
1
of the flexible hose L in the
vacuum connection H (fig. 4-5-6)
Never use the appliance without a filter!
VACUUMING DUST
• Fit the most suitable accessory in the handle
of the flexible hose L.
- Connect the device to a suitable electrical
outlet.
- Start vacuuming by pressing main switch B.
- To select the suction power (from level 1 to
level 4), press the remote suction button L
1
on the handgrip at short intervals; the se-
lected suction power level LED indicator will
light up. It is possible to change the power
level both when the suction is on and off. To
switch the vacuum on and off, hold down
the remote suction button L
1
for about two
seconds.
TABLE OF USE
Always test on a hidden area of the material.
Normal dirt Intense dirt Drying
Car interior: seats foam foam/steam vacuum
Car interior: floor mats/carpet vacuum steam/detergent vacuum
Car interior: roof lining/windows steam steam vacuum
Car interior: dashboard vacuum vacuum/compressed air cloth
Car rims steam/detergent vapore/detergente cloth
Rugs and carpets in general foam foam/steam vacuum
Bathrooms, floors, upholstery foam steam/detergent vacuum
Parquet foam foam vacuum
Stainless steel surfaces foam steam/detergent vacuum
EN
17