Superabrasive
User Manual
Original Language
Lavina® 25-X
9/2018
20
The reassembly is the same process in
reverse. It is important to match the
threads of the conical sleeve and the belt
washer(Fig.8.7.13). Put the front washer
(Fig.8.7.14), on the screw ‐ using “blue”
thread locking adhesive.
Tightening force
of the bolts has to be 4,5...6N.m(3,3...4,4
ft/lbs). Carefully replace the two binder
screws while leaving the central thread
open.(Fig.8.7.14)(Fig.8.7.15). Insert the
screws by alternating at 1.5 revolution
each until the conical sleeve pulls up the
belt pulley. The conical sleeve must be
aligned in height with the belt
washer(Fig.8.7.16).
Dismounting the planetary belt is
possible without removing of the
Bottom cover assembly by
unscrewing the eight bolts and removing the service window cover and the sealing
(Fig.8.7.17)(Fig.8.7.18) to access the
planetary belt (see
8.7.19)
Figure 8.7.10
Figure 8.7.11
Figure 8.7.7
Figure 8.7.8
Figure 8.7.9
Figure 8.7.13
Figure 8.7.14
Figure 8.7.16
Figure 8.7.15
Figure 8.7.19
Figure 8.7.18
Figure 8.7.17
