Superabrasive User Manual Original Language
Lavina
® 21-X
4/2015
16
Mount the holder on the machine using the same socket as
mentioned in 8.2 (Fig.8.3.10;Fig.8.3.11). The retaining washer fits
into the central hole of adaptor and the four bolts into the thread
holes. The holder is centered on the outside diameter of the
adaptor. Ensure the connection of the holder on the forehead of
the adaptor and then tight evenly the four bolts. Tightening force
of the bolts has to be 22...25N.m(16...18 ft/lbs). Mounting the
holder without retaining washer (Fig.8.3.2) is
INADMISSIBLE
because the security system preventing the separation of part of
the holder in case of broken buffers and elastic element will not
function!
You can change the butterfly of the holder without
dismounting the holder of the machine.
Fig.8.3.12 is 3-d section view of the holder, showing
its parts. The numbering is the same as in Spare
parts.
Figure 9.3.1
Figure 9.3.2
Figure 9.3.3
Figure 9.3.6
Figure 9.3.7
Figure 9.3.4
Figure 9.3.5
Figure 9.3.8
Figure 9.3.9
Figure 8.3.12
Figure 8.3.10
Figure 8.3.11
