Superabrasive User Manual Original Language
Lavina
® 21-X
4/2015
11
STOPPING THE MACHINE
The stopping of the machine must be done gradually until the motor stops. Do not stop moving the machine before arresting
the motor as the tools could damage the surface. To stop push the emergency/stop button (3).
Remember not to hold the machine in one spot before turning off the motor.
5. TOOLS AND ACCESSORIES
WEIGHTS
Superabrasive offers four additional weights of 18.5 lbs or 8 kg (Fig.5.1) item number L21-50.00.00.The weights stacks on
the 3 posts around the outer bowl (Fig.5.2) or on top of each other (Fig.5.3).
The additional weights depend on the tools; it is not always possible to add weights. Some tools work too aggressively and
the machine can stop.
TOOL HOLDER KEY
The tool holder key (Fig. 5.4) is used for adjusting, mounting and dismounting of
the foam plates. Always use the key for mounting. Item number is A03.00.00.00
FOAM PLATE
Diamond tools with Velcro are mounted on the foam plate 7
“(Fig.5.5). The foam plate is
mounted on the “QuickChange” System.
Item number is LV-7-FP-S
SECURITY PLATE FOR QUICKCHANGE PADS
Plate used to ensure the “Quickchange” pads. Item number is A38.00.04 (Fig.5.6)
Figure 5.1
Figure 5.6
Figure 5.4
Figure 5.5
