E N
The lid must always be inserted during operation.
7
The appliance emits a beep.
8
The power button lights up with a flashing green light.
9
The machine starts the heating cycle.
10
The heating process ends automatically when the milk is sufficien-
tly hot.
11
The machine emits a double beep to indicate the end of the heating
process.
12
The power switch turns off.
Remove the hot container
only
by the handle.
Open the lid and pour the
frothed milk into the cup.
To froth milk, fill the container up to the 120 ml
• mark under the MAX level
To heat up and blend the milk, fill the container up to the 180 ml
• mark above the MAX level
SELECTION OF ACCESSORIES
• To heat and froth the milk at the same time, use only the
notched crown.
• To heat the milk and blend (e.g.. hot chocolate), adjust the
notched crown inside the smooth crown, place them in the
container making sure that the smooth crown is facing
down.
Do not use the cappuccino maker without inserting the supplied
crowns.
HEAT AND FROTH MILK
1
Place the container on the base, making sure it is positioned cor-
rectly.
2
Remove the lid from the milk container.
3
Place the chosen crown on the assembly ledge that is located on
the bottom of the container.
Notched crown (to froth milk)
Smooth crown (to heat and blend)
4
Pour the milk into the container. Refer to chapter
“
Filling amount
”.
5
Place the lid on the container.
6
Press the On/Off switch.
USE OF THE CAPPUCCINO MAKER