LAVAMAC AR-105 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 56

background image

Safety Precautions

6

INSTALLATION, MAINTENANCE AND USER' MANUAL

549263_D_PUB_DATE_7_JUL_2014.DOC

WARNING

IF THE INSTALLED APPLIANCE OPERATE WITH COIN, TOKEN OR SIMILAR OPERATION FOR USE IN
SELF-SERVICE SITUATIONS, THEN THE OWNER-INSTALLER MUST PROVIDE A REMOTE-LOCATED
EMERGENCY STOP DEVICE. THIS DEVICE MUST BE PLACED IN SUCH A WAY THAT IT IS EASY AND
SAFELY ACCESSIBLE FOR THE USERS. THE EMERGENCY STOP DEVICE TAKES CARE THAT AT
LEAST THE CONTROL CIRCUIT OF THE APPLIANCE IS INTERRUPTED.

WARNING

DO NOT TOUCH THE DOORGLASS UNTIL CYCLE HAS BEEN COMPLETED. DO NOT OPEN DOOR
UNTIL CYLINDER REMAINS STOPPED AND WATER HAS BEEN DRAINED FROM CYLINDER.
DO NOT PUT ARTICLES SOILED WITH EXPLOSIF SOLVENTS AND/OR DANGEROUS CHEMICAL
PRODUCTS IN THE MACHINE. THIS MACHINE SHOULD NOT BE USED BY CHILDREN.
DO NOT LET CHILDREN PLAY IN, ON, OR AROUND THE MACHINE. BEFORE TURNING THE
MACHINE “ON”, MAKE SURE THAT THERE ARE NO PEOPLE OR ANIMALS PRESENT IN OR
AROUND THE MACHINE.

WARNING

ORIGINAL OR IDENTICAL PARTS MUST BE USED FOR REPLACEMENT IN THIS MACHINE.
AFTER SERVICING REPLACE AND SECURE ALL PANELS IN THE ORIGINAL WAY. TAKE THESE
MEASURES FOR CONTINUED PROTECTION AGAINST ELECTRICAL SHOCK, INJURY, FIRE AND/OR
PROPERTY DAMAGE.

WARNING

THIS APPLIANCE MUST BE CONNECTED TO A GROUNDED METAL, PERMANENT WIRING SYSTEM,
AND ADDITIONALLY AN EQUIPMENT-GROUNDING CONDUCTOR MUST BE RUN WITH THE CIRCUIT
CONDUCTORS AND CONNECTED TO THE EQUIPMENT-GROUNDING TERMINAL OR LEAD ON THE
APPLIANCE.

WARNING

IN ORDER TO MINIMIZE THE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY, THIS WASHER
MUST BE PROPERLY GROUNDED. NEVER PLUG IN OR DIRECT-WIRE AN APPLIANCE UNLESS IT IS
PROPERLY GROUNDED IN ACCORDANCE WITH ALL LOCAL AND NATIONAL CODES.
IF MORE APPLIANCES IN THE SAME LOCATION, MUTUAL GROUNDING MUST BE APPLIED WHERE
POSSIBLE.

WARNING

ALWAYS CONSULT THE STATIC REQUIREMENTS WITH A STATIC ENGINEER IN ORDER TO MEET
THE REQUIREMENTS OF PERMISSIBLE LOADS, VIBRATIONS AND NOISE LEVEL IN THE BUILDING!
THE MANUFACTURER DOES NOT RECOMMEND INSTALLING THE WASHING MACHINE IN A ROOM
WITH A CELLAR UNDERNEATH OR ON A FLOOR HAVING ROOMS UNDERNEATH. THE WASHER
EXTRACTOR IS INTENDED TO BE PERMANENTLY CONNECTED, IT MUST BE SECURED MOUNTED
TO A NON-COMBUSTIBLE, ADEQUATE FLOOR STRUCTURE. A CONCRETE FOUNDATION IS
REQUIRED. METAL REINFORCED WOOD FLOORS ARE NOT ALLOWED DUE TO THE RISK OF FIRE
AND EXCESSIVE VIBRATIONS.
NEVER INSTALL THE WASHER ON A BASEMENT WITHOUT A LOAD SUPPORT DESIGNED BY A
STRUCTURAL ENGINEER.

WARNING

ALTHOUGH THE APPLIANCE MAY BE IN THE “OFF” POSITION, THERE IS STILL ELECTRICAL
POWER TO THE SWITCH SUPPLY TERMINALS.

!

!

!

!

!

!

!

«
...
4
5
6
7
8
...
»

Содержание AR-105

























































Отзывы:

Нет отзывов

Похожие инструкции для AR-105

Бренд: GE Страницы: 2

Бренд: Campbell Hausfeld Страницы: 18

Бренд: Daewoo Страницы: 33

Бренд: Briggs & Stratton Страницы: 132

Бренд: Blomberg Страницы: 40

Бренд: ZANKER Страницы: 48

Бренд: Howdens Страницы: 12

Бренд: GENMAX Страницы: 36

Бренд: BENDIX Страницы: 24

Бренд: Hotpoint Страницы: 24

Бренд: Asko Страницы: 24

Бренд: Generac Portable Products Страницы: 20

Бренд: Kärcher Страницы: 235

Бренд: Electrolux Страницы: 28

Бренд: Electrolux Страницы: 27

Бренд: Electrolux Страницы: 39

Бренд: Electrolux Страницы: 44

Бренд: Electrolux Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды