![background image](http://html1.mh-extra.com/html/launch/x-431-pad-vi/x-431-pad-vi_user-manual_3927102039.webp)
Safety
& Accessory
Initial Use
Diagnostics
FAQ & Care
Product Profile
33
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
6 Maintenance Reset
In addition to amazing & powerful diagnostic function, the tablet also features various service functions. The
most commonly performed service functions contain:
•
Oil Reset Service
• Electronic Parking Brake reset
•
Steering Angle Calibration
• ABS Bleeding
• TPMS (Tire Pressure Monitor System) reset
•
Gear Learning
• IMMO Service
• Injector Coding
• Battery Maintenance System
• Diesel Particulate Filter (DPF) regeneration
•
Electronic Throttle Position Reset
•
Gearbox Matching
• AFS (Adaptive Front-lighting System) reset
• Sunroof Initialization
•
Suspension Calibration
•
EGR Adaption
•
Seats Calibration
•
Tyre Reset
• Coolant Bleed
• AdBlue reset (Diesel Engine Exhaust gas Filter)
•
NOx Sensor Reset
There are two methods to reset service lamp: Manual reset or Auto reset. Auto reset follows the principle
of sending command from the tool to vehicle’s ECU to do resetting. While using manual reset, users just
follow the on-screen instructions to select appropriate execution options, enter correct data or values, and
perform necessary actions, the system will guide you through the complete performance for various service
operations.
Select
“
Reset
”
Select the desired reset
item
(e.g. oil lamp reset
etc.)
Select the car brand
Select the service mode
(The available mode varies
from vehicle to vehicle)
Follow the instructions
on the screen to operate
6.1 Oil Reset Service
This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life
change interval depending on the vehicle driving conditions and climate.
This function can be performed in the following cases:
1. If the service lamp is on, you must provide service for the car. After service, you need to reset the driving
mileage or driving time so that the service lamp turns off and the system enables the new service cycle.