![background image](http://html1.mh-extra.com/html/launch/x-431-pad-vi/x-431-pad-vi_user-manual_3927102031.webp)
Safety
& Accessory
Initial Use
Diagnostics
FAQ & Care
Product Profile
25
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
report.
Note: Diagnostic report is classified into three categories: Pre-Repair report, Post-Repair report and Diagnostic
Scan. No matter which type you saved the report as, the report type will be appended as a tag on the upper right
corner of the diagnostic report for easier identification.
To facilitate the comparison of the pre-repair and post-repair reports and get accurate test result, please make
sure you saved the right type of the diagnostic report.
To save the report as a common diagnostic report, select
Diagnostic Scan
.
On the report details page, tap
Save
to save it. All diagnostic reports can be accessed from
User Info ->
My Reports -> Health Report
.
Help: Tap to view the help information of the selected DTC item.
Compare Results
: Tap to select the pre-repair report to compare. By comparison of the pre- and post- repair
reports, you can easily identify which DTCs are cleared and which remain unfixed.
The DTC status
of
post-repair
The DTC status
of
pre-repair
Note: Before performing this function, please make sure that:
• You have saved a pre-repair report of the currently tested vehicle, and
• You have already made some repairs and service and cleared the DTCs after the pre-repair reported is generated.
Otherwise, no differences exist between the pre- and post- repair reports.
Clear DTC: Tap to clear the existing diagnostic trouble codes.
Note: Clearing DTCs does not fix the problem(s) that caused the code(s) to be set. If proper repairs to correct
the problem that caused the code(s) to be set are not made, the code(s) will appear again and the check engine
light will illuminate as soon as the problem that cause the DTC to set manifests itself.