![background image](http://html1.mh-extra.com/html/launch/x-431-pad-vi/x-431-pad-vi_user-manual_3927102014.webp)
Safety
& Accessory
Initial Use
Diagnostics
FAQ & Care
Product Profile
8
www.x431.com +86 755 8455 7891
LAUNCH
PAD VII
User Manual
3 Preparations
3.1 Charging the Tablet
Warnings:
• Only use the included power adaptor to recharge the tablet. Use of any other adaptor will damage the tool. We
assume no responsibility for damage or loss resulting from using other similar adaptors other than the specified
one.
• Always charge on a non-flammable surface in a well-ventilated area.
1. To check the battery power level, press and hold the
Power button about 3 seconds to turn on the tablet.
2. Power level is indicated as a percentage in the
upper right corner of the screen. If the power
level drops below 10% while the tablet is on,
a
Connect Charger
notification will appear on
the screen.
1. Connect one end of the power adaptor to Type C
charging port of the tablet, and the other end to the
AC outlet.
2. The charging LED illuminates solid red and the
charging symbol will appear on the screen.
3. Once it illuminates solid green, it indicates that
the battery is fully charged and the charging
complete symbol replaces the charging sym-
bol. Disconnect the power adaptor from the AC
outlet.
3.2 Power ON/OFF
Note: If it is the first time you use the tablet or the tablet keeps idle for a long time, it could fail to be turned on.
It results from low battery. In this case, please recharge it for a while and try to turn it on.
1. Press and hold the POWER button for about 3 sec-
onds to turn on the tablet. The system starts initial-
izing and then enters the Home screen.
2. To turn the tablet off, press and hold the
POWER button until an option menu appears.
Tap
Power Off
.
3.3 Locator & Navigation Buttons
1
2
3
4
5
6
On-screen keys and status bar are as follows:
1
Tap
to visit the Launch’s official website.
2
Tap to capture the current screen and all captured screenshots are stored in the
Screenshots folder.
3
: Shows whether the SmartLink C device is properly connected or not.
4
Tap to display a list of applications that are currently running or recently used. To open
an application, tap it. To remove an application, swipe it upwards.
5
Tap
to navigate to the Android System’s home screen.
6
Tap to return to the previous screen or exit the application.