L a u n c h T L T 2 6 0 A T T w o - p o s t l i f t u s e r ’ s m a n u a l
7
7.Storage and Scrap
7.1 Storage
When the equipment requires long-time storage:
z
Disconnect the power supply
z
Lubricate all the parts requiring lubrication: mobile contact surface of the carriage, etc.
z
Empty all the oil/liquid storage units
z
Put the plastic cover over the equipment for dust protection
7.2 Scarp
When the equipment service life is expired and can no longer be used, disconnect the power supply, and properly dispose
of as per relevant local regulations.
8. Tools for installation and adjustment
To ensure proper installation and adjustment, please prepare the following tools:
Tool Model
Leveling instrument
Carpentry type
Chalk line
Min 4.5m
Taper Plunger Chip
Hammer 1.5kg
Tweezer Small
type
Crescent wrench
40mm
Open-end wrench set
11mm-23mm
Ratchet socket set
Flat screwdriver
150mm
Rotary hammer drill
20mm
Concrete drill-bit
4 feet bubble level
9. Unpacking
z
Open the packing box; remove the packing materials and inspect the lift for any sign of shipment damage. Check
packing list to see if the main parts and accessories are complete.
z
Keep the packing materials away from the children to avoid danger; if the packing materials cause the pollution,
they shall be treated properly.
10. Installation
10.1
Important notice
z
The wrong installation will cause the lift damage or
personal injury. The manufacturer will not
undertake any responsibilities for any damage
caused due to incorrect installation and usage of
this equipment, whether directly or indirectly.
z
The correct installation location shall be
“horizontal” floor to ensure the horizontal lifting.
The slightly slope floor can be corrected by proper
shimming. Any big slope will affect the height of the
lifting pad when at the bottom or the horizontal
lifting. If the floor is of questionable slope, consider
a visual inspection, or pour a new horizontal
concrete slab if possible. In short, under the
optimum horizontal lifting status, the level of the
lifting relies on the level of the floor where it is
installed. Don’t expect to compensate for the
serious slope.
z
Don’t install this lift on any asphalt surface or any
surface other than concrete. The lift must be
installed on concrete conforming to the minimum