LAUNCH KWA-300 3D Wheel Aligner Introduction
1-5
Fig.1.9
The data collecting system consists of 4 cameras with
high resolution and 4 targets. The left and right cameras
capture the images on the left and right targets, and
transmit them to the data processing system via the
image collector. The targets are attached on the wheel
rims via wheel clamps. So the geometrical relationships
among 4 wheel rims are calculated according to the
images captured by cameras from the targets and
further to confirm the aligning parameters of the wheels.
The data processing system is the main unit of
KWA-300 3D. It consists of a computer, power supply
system and interfaces. Its function is to execute the
operation commands, process the data and display the
information together with the original data of vehicle
manufacturer. It also gives instructions for making
adjustment to the vehicle and print out corresponding
report.
The wheel aligner compares the measured results with
the original data of vehicle manufacturer and gives
instructions to the user for adjustment, so its databank
should contain enough information. KWA-300 3D Wheel
Aligner databank contains over 20,000 models
alignment data, and user can also add new vehicle
wheel alignment data into the databank when
necessary.
Computer, image collector
Keyboard,
mouse
Printer
Monitor
Left camera
Right camera
Right target
Left target
Содержание KWA-300
Страница 1: ......
