LAUMAS W200-C, Инструкция по установке и эксплуатации

Страница: 38 / 56

- 33 -
SLOW ON
 (from 0 to max 9.9; default: 0): time in which the SET relay remains closed during the
SLOW phase. By setting 0, the function is disabled.
SLOW OFF
 (from 0 to max 9.9; default: 0): time in which the SET relay remains open during the SLOW
phase. By setting 0, the function is disabled.
AUTOTARE

(from 0 to 999; default: 0): autotare enabling (automatic tare at batching start); the autotare
will be updated every as many cycles of a single batching sequence as are set in this parameter. By
setting 0, the function is disabled.
This operation is possible only if the gross weight is lower than the minimum weight (

),
otherwise the  alarm message is displayed.
AUTOTARE DELAY

(from 0 to max 99.9; default: 0): the instrument waits for this time, after the starting of the
formula, before performing the autotare and starting the batching.
STABLE TARE

(default:

): autotare enabled at stable weight.
-

: if autotare enabled, zero-setting at batching start is done after a possible delay time and
only when the weight is stable.
-

: if autotare enabled, zero-setting is done right after the delay time.
CONSUMPTION FOR EACH FORMULA
 (default  ): enabling consumption memory (total batched quantity) for each formula.
-

: consumption enabled
-

: consumption disabled.