11
CLEANING THE SEAT AND COVER UNIT
The seat and cover are integrated in a single unit because of the
lowering system.
The seat and cover unit can be removed to make the shower toilet
easier to clean. Simply lift the seat and cover to a vertical position, use a
coin to release the locking screws and pull the seat and cover from the
hinge at both sides. Clean the seat and cover in a bathtub for exmaple.
You can also use a mild diluted liquid detergent. After cleaning,
reassemble the seat and cover and insert in the hinge in a vertical
position and tighten. You will find further cleaning and
care hints in the separate care instructions.
CLEANING THE CERAMIC SURFACE
Aggressive cleaning products are no longer required due to the
specially glazed ceramic surface. Clean the ceramic surface
using a standard all-purpose detergent diluted with water.
Use a sponge with a soft, non-scratch surface or alternatively
a microfibre cloth.
Do not use aggressive or abrasive agents, tools or
instruments to clean the appliance.
CLEANING PLASTIC SURFACES
AND METAL COMPONENTS
Plastic surfaces
Seat and cover unit
Cover ring and nozzle
Descaling
Wipe over these components with a soft, damp cloth and an extremely
mild, diluted cleaning detergent, if required.
Then dry the components using a soft cloth.
Do not use aggressive or abrasive agents, tools or
instruments to clean the appliance.
5.1
5.2
5.3
5 MAINTENANCE AND CLEANING
Metal components
Controller and metal cover
Hinge
Shower arm
Laufen_Cleanet_Navia_manual_EN.indd 11
Laufen_Cleanet_Navia_manual_EN.indd 11
29.10.21 09:45
29.10.21 09:45
