Certus-NX Versa Evaluation Board Demo
User Guide
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02133-1.1
15
3.4.
Programming the Demo .bit File to the Certus-NX Versa Evaluation Board
To program the demo .bit file to the board:
1.
Start the Radiant Programmer 2.2 software.
2.
In the Getting Started dialog box, enter the Project Name and Project Location. Click OK.
Figure 3.9. Radiant Programmer New Project
3.
The Radiant Programmer main interface opens.
Figure 3.10. Main Interface
